Feature Media
Your image
 

Pool Products

Two Models to Pick From

Standard Turbo To 50,000 Gallons

 Standard Turbo To 50,000 Gallons
  • Standard Turbo to 50,000 Gallons 
  • You select "IONIZE" or "OXIDIZE." 
  • Generates low DC voltage amperage to electrodes. 
  • Unit remains in oxidize always, unless copper ppm falls below 0.4 ppm

Residential

Technical Specifications
  • Input Voltage: 110V; 220V Available, 50 or 60 Cycle, CE Low Voltage Approved
  • Output Voltage: 30 VA Class UL CSA Compliance Power Supply, CE Low Voltage Approved 
  • Ionization Electrode: 100% Pure Copper with coating 
  • Oxidation Electrode: Proprietary Titanium composite material 
  • Rated to 50,000 gallons, on Swimming Pool Models 
  • Spa and Above Ground Pool Models 200 to 10,000 gallons 
  • Koi/Waterfall Pond Units to 100,000 gallons Pond and small Waterfall units also available at lower cost 
  • Automated, Programmable Units to 100M gallon

Programmable Turbo to 100,000 Gallons

Programmable Turbo to 100,000 Gallons
  • Programmable Turbo to 100,000 Gallons*
  • Digital display to fully automate your ECOsmarte® Pool with CO² pH Control.
  • *Higher daily bather loads require additional equipment.
  • Installs to 50,000 gallons.

Commercial

Technical Specifications
  • Input Voltage: 110V or 220V; 240V Available, 50 Cycle, CE Low Voltage Approved
  • Output Voltage: 100 VA Class UL CSA Compliance Power Supply. CE Low Voltage Approved, UL Pending
  • Oxidation Electrode: Proprietary Titanium composite material
  • Ionization Electrode: 100% Pure Copper with coating
  • Rated to 300,000 gallons, priced from $4999. Programmable from $5,495 to $19,999
  • Custom plumbing available, toll-free technical support
  • Hundreds of hotel, apartment complex pools online
  •  NEMA 4 Equipment Enclosure
  • CO² Systems incl. switchover tank manifold, addl. actual configuration costs quoted
Sample image

Custom Pool Covers

They walked carefully through the china country. The little animals and all the people scampered out of their way.

 

pH Down Without Chemicals 
Chemical–Free Pool Systems 
The Automated Non–Chemical Pond

Carbon Dioxide pH Control System ECOsmarte Planet Friendly, Inc.

Image caption

Mount the system securely to a standard high pressure Carbon Dioxide cylinder. Attach the power cord to a 110V outlet in your timer or hard wired (DC Voltage) to the ECOsmarte® Upgraded Controller. PVC injector check valve chamber should be plumbed into the return line in appropriate location as determined by installer and connected to the system with 3/8" flexible tubing included. The high pressure CO² cylinders can be filled at any welding shop or microbrewery, or exchange at your ECOsmarte® showroom. We Recommend a minimum tank size of 20lbs, refillable for $25.00 or less, with expected 4 to 6 week change outs.

Operation and Maintenance

The flow rate has been preset to meet maximum demand for CO² pH control. The controller shall actuate the flow control solenoid valve to provide pH correction as determined by our factory preset proportional feed control logic. Maintenance of the flow control unit is minimal, normal care in cleaning is advised. Field information and research indicates that it is impossible to achieve a pH below 6.7, so choose 20 minutes per day to begin. Ranges are typically 20 to 40 minutes depending on pool size and source water. Increase or decrease time as phenol red pH tests dictate during the start up.

The CO² time will need to be adjusted to minimize cost of tank refills. The field experience indicates no need for pH sensors and their calibration and maintenance requirements. Customers should test twice weekly for the first 30 days.